LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 914 (Front Suspension) >> Removal And Installation >> Lower Link >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the wheel and tire using power tool. Refer to "ROTATION ".
  2. Remove the lower shock absorber bolt.
  3. Remove the stabilizer bar connecting rod lower nut using power tool. Separate the connecting rod from the lower link. Refer to "REMOVAL AND INSTALLATION ".
  4. Remove the drive shaft (if equipped). Refer to "REMOVAL AND INSTALLATION ".
  5. Remove the pinch bolt and nut from the steering knuckle using power tool. Separate the lower link ball joint from the steering knuckle.
    Fig 1: Locating Front LH Lower Link Pinch Bolt And Nut
    G04902072Courtesy of NISSAN NORTH AMERICA, INC.
  6. Remove the lower link bolts/cam bolts (if equipped) (1) and nuts. Remove the lower link (2).
    Fig 2: Identifying Cam Bolts And Front Lower Link
    G04902058Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals