LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 914 (Front Suspension) >> Removal And Installation >> Coil Spring And Shock Absorber >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the wheel and tire using power tool. Refer to "ROTATION ".
  2. Turn steering knuckle out to gain enough clearance for removal.
  3. Remove the shock absorber lower bolt using power tool.
  4. Remove the three shock absorber upper nuts using power tool.
  5. Remove the coil spring and shock absorber.
    Fig 1: Removing Shock Absorber Upper And Lower Nuts Using Power Tool
    G04902063Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals