Removal and Installation: Installation

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.

Installation is in the reverse order of removal.

Position the coil spring and shock absorber (1) in the vehicle with the studs on the shock absorber mounting insulator (3) in line with the lower shock mount and the lower seat step (2). The lower seat step faces the outside of the vehicle.

Fig 1: Identifying Shock Absorber Coil Spring, Studs And Lower Seat Step
Courtesy of NISSAN NORTH AMERICA, INC.
Tighten all nuts and bolts to specification. Refer to "EXPLODED VIEW ".