Removal and Installation: Installation

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.

Installation is in the reverse order of removal.

CAUTION: Do not reuse the suspension arm nuts at the rear suspension member.

Tighten the nuts and bolts to specification. Refer to "EXPLODED VIEW ".
Perform final tightening of nuts and bolts for the links under unladen condition with the tires on level ground. Unladen condition means that the fuel tank, engine coolant and lubricants are at the full specification, and the spare tire, jack, hand tools, and mats are in their designated positions.