Removal and Installation: Removal

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.

Remove the nuts and disconnect the stabilizer bar ends from the connecting rods using power tool.

Fig 1: Disconnecting Stabilizer Bar Ends From Connecting Rods Using Power Tool
Courtesy of NISSAN NORTH AMERICA, INC.
Remove the bolts and the stabilizer bar clamps using power tool.
Remove the stabilizer bar bushings.
Remove the stabilizer bar.

Fig 2: Identifying Stabilizer Bar Bushing And Clamp
Courtesy of NISSAN NORTH AMERICA, INC.