Removal and Installation: Removal

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.

Use CONSULT "EXHAUST SOLENOID" active test to release the air pressure from the rear load leveling air suspension system.
Disconnect the harness connectors from the rear load leveling air suspension compressor assembly.
Remove the rubber cover to access the rear load leveling air suspension compressor assembly.
Disconnect the rear load leveling air suspension hoses at the rear load leveling air suspension compressor assembly.
NOTE: To disconnect the hoses, push in on the lock ring using a suitable tool and pull the hose out.

Fig 1: Identifying Air Hoses And Rear Load Leveling Air Suspension Compressor Assembly
Courtesy of NISSAN NORTH AMERICA, INC.
Remove the four bolts that mount the rear load leveling air suspension compressor assembly to the underbody.

Fig 2: Identifying Rear Load Leveling Air Suspension Compressor Assembly Mounting Bolts
Courtesy of NISSAN NORTH AMERICA, INC.