LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 911 (Rear Final Drive (R230)) >> Unit Disassembly And Assembly >> Rear Final Drive >> Disassembly and Assembly >> Disassembly >> Side Flange

Side Flange

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain the differential gear oil if necessary.
  2. Remove the side flange using Tools.

    Tool numbers (A): KV40104100 (-) 

    (B): ST36230000 (J-25840-A) 

    Fig 1: Removing Side Flange Using Tool
    G04901926Courtesy of NISSAN NORTH AMERICA, INC.
  3. Remove the side oil seal using suitable tool.
    CAUTION: Do not to damage gear carrier.
    Fig 2: Removing Side Oil Seal Using Suitable Tool
    G04901927Courtesy of NISSAN NORTH AMERICA, INC.