LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 911 (Rear Final Drive (R230)) >> Periodic Maintenance >> Differential Gear Oil >> Changing Differential Gear Oil >> Filling

Changing Differential Gear Oil: Filling

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the filler plug and gasket from the rear final drive assembly.
  2. Fill the rear final drive assembly with new differential gear oil until the level reaches the specified level near the filler plug hole.

    Differential gear oil grade and capacity: Refer to  "FOR USA AND CANADA: FLUIDS AND LUBRICANTS " (United States and Canada), "FOR MEXICO: FLUIDS AND LUBRICANTS " (Mexico).

    Fig 1: Checking Differential Gear Oil Level
    G04901919Courtesy of NISSAN NORTH AMERICA, INC.
  3. Install the filler plug with a new gasket on it to the rear final drive assembly. Tighten to the specified torque. Refer to "DISASSEMBLY AND ASSEMBLY ".
    CAUTION: Do not reuse gasket.
scientia non olet · About LEMON Manuals