LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 910 (Transfer Case) >> System Description >> Diagnosis System (Transfer Control Unit) >> CONSULT Function (ALL MODE AWD/4WD) >> Self Diagnostic Result Mode >> How to Erase Self-diagnostic Results

How to Erase Self-diagnostic Results

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Perform applicable inspection of malfunctioning item and then repair or replace.
  2. Start engine and select SELF-DIAG RESULTS mode for ALL MODE AWD/4WD with CONSULT.
  3. Touch ERASE on CONSULT screen to erase DTC memory.
    CAUTION: If memory cannot be erased, perform applicable diagnosis.
scientia non olet · About LEMON Manuals