LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 910 (Transfer Case) >> System Description >> Diagnosis System (Transfer Control Unit) >> CONSULT Function (ALL MODE AWD/4WD) >> Self-Diagnostic Procedure (Without Consult) >> Diagnostic Procedure

Diagnostic Procedure

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Warn up engine.
  2. Move A/T selector lever to P position.
  3. Turn 4WD shift switch to 2WD position.
  4. Turn ignition switch ON and OFF at least twice, and then turn ignition switch OFF.
  5. Turn 4WD shift switch to AUTO position.
  6. Turn ignition switch ON. (Do not start engine.)
  7. 4WD warning lamp ON.
  8. Move A/T selector lever to R position.
  9. Turn 4WD shift switch to 2WD, AUTO and 2WD in order.
  10. Move A/T selector lever to D position.
  11. Turn 4WD shift switch to 4H, AUTO and 4H in order.
  12. Move A/T selector lever to N position.
  13. Turn 4WD shift switch to AUTO position.
  14. Move A/T selector lever to P position.
  15. Read the flickering of 4WD warning lamp.