Removal and Installation: Removal

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.

Remove the rear propeller shaft. Refer to "UNIT REMOVAL AND INSTALLATION ".
Remove the dust cover from the rear case.
CAUTION: Do not damage the rear case.

Fig 1: Identifying Rear Case Dust Cover
Courtesy of NISSAN NORTH AMERICA, INC.
Remove the rear oil seal from the rear case using Tool.
Tool number: ST33290001 (J-34286)

CAUTION: Do not damage the rear case.

Fig 2: Removing Rear Oil Seal From Rear Case Using Tool
Courtesy of NISSAN NORTH AMERICA, INC.