Component Inspection
WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
- Turn ignition switch OFF. (Stay for at least 5 seconds.)
- Remove transfer shut off relay. Refer to "COMPONENT PARTS LOCATION ".
- Apply 12V direct current between transfer shut off relay terminals 1 and 2.
- Check continuity between relay terminals 3 and 5.
Condition Continuity 12V direct current supply between terminals 1 and 2 Yes OFF No - If inspection results are abnormal replace the transfer shut off relay.