Component Inspection
WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
- Turn ignition switch OFF. (Stay for at least 5 seconds.)
- Disconnect neutral-4LO switch harness connector.
- Remove neutral-4LO switch. Refer to "COMPONENT PARTS LOCATION ".
- Push and release neutral-4LO switch and check continuity between neutral-4LO switch terminals 12 and 13.
Terminal Condition Continuity 12 - 13 Push neutral-4LO switch Yes Release neutral-4LO switch No - If the inspection results are abnormal replace the neutral-4LO switch.