Component Function Check
WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK OPTICAL SENSOR SIGNAL BY CONSULT
WITH CONSULT
- Turn the ignition switch ON.
- Select "OPTICAL SENSOR" of BCM (HEAD LAMP) DATA MONITOR item.
- Turn the lighting switch to AUTO.
- With the optical sensor illuminating, check the monitor status.
Monitor item Condition Voltage OPTICAL SENSOR When illuminating 3.1V or more (1) When shutting off light 0.6V or less (1) Illuminates the optical sensor. The value may be less than the standard value if brightness is weak. Is the item status normal?
YES: Optical sensor is normal.
NO: Refer to "DIAGNOSIS PROCEDURE ".