Removal and Installation of Brake Caliper and Disc Rotor: Removal
WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
- Remove rear wheels and tires using power tool. Refer to "ROTATION ".
- Fasten disc rotor using wheel nut.
- Remove brake reservoir cap.
- Remove union bolt, copper sealing washers and cylinder body bolts, then remove cylinder body.CAUTION: Do not reuse copper sealing washers.
- Apply matching marks to disc rotor and wheel hub assembly if the disc rotor is to be reused, then remove disc rotor.CAUTION: Put matching marks on wheel hub assembly and disc rotor if the disc rotor is to be reused.