Removal and Installation of Front Brake Piping and Brake Hose: Removal

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.

Remove front wheel and tire using power tool.
Remove brake reservoir cap.
Remove brake tube from brake hose, using a suitable tool.
Remove lock plate and brake hose from bracket.

Fig 1: Identifying Brake Tube, Brake Hose, Lock Plate And Flare Nut
Courtesy of NISSAN NORTH AMERICA, INC.
Remove union bolt and then remove brake hose and copper sealing washers from cylinder body.
CAUTION: Do not reuse copper sealing washers.

Fig 2: Identifying Brake Hose And Union Bolt
Courtesy of NISSAN NORTH AMERICA, INC.