Removal and Installation: Installation
WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
Installation is in the reverse order of removal.
- Refill brake fluid and bleed air. Refer to
"BLEEDING BRAKE SYSTEM ".CAUTION:
- Refill with new brake fluid. Refer to "FOR USA AND CANADA: FLUIDS AND LUBRICANTS ".
- Do not reuse drained brake fluid.
- Do not reuse seal.
- Do not reuse master cylinder assembly nuts.
- Do not reuse grommets.
- Adjust brake pedal. Refer to "INSPECTION AND ADJUSTMENT ".