LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 900 (Brake System) >> Basic Inspection >> Rear Disc Brake >> Disc Rotor >> DISC ROTOR: Inspection >> Thickness

DISC ROTOR: Inspection: Thickness

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.

Check the thickness of the disc rotor using a micrometer. Replace disc rotor if the thickness is less then the wear limit.

Standard thickness: Refer to  "REAR DISC BRAKE ".

Repair limit thickness: Refer to  "REAR DISC BRAKE ".

Thickness variation (Measured at 8 positions): Refer to  "REAR DISC BRAKE ".

Fig 1: Measuring Disc Rotor Thickness Using Micrometer
G04887111Courtesy of NISSAN NORTH AMERICA, INC.