LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 899 (Brake Control System (VDC/TCS/Abs)) >> Unit Removal And Installation >> Yaw Rate/Side/DECEL G Sensor >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove front center console. Refer to "REMOVAL AND INSTALLATION ".
  2. Remove yaw rate/side/decel G sensor attaching nuts.
    CAUTION:
    • Do not use power tools to remove or install yaw rate/side/decel G sensor.
    • Do not drop or strike the yaw rate/side/decel G sensor.
  3. Disconnect harness connector and remove the yaw rate/side/decel G sensor.
scientia non olet · About LEMON Manuals