LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 899 (Brake Control System (VDC/TCS/Abs)) >> Unit Removal And Installation >> Steering Angle Sensor >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove spiral cable. Refer to "REMOVAL AND INSTALLATION ".
  2. Remove the screws and remove the steering angle sensor.