Component Inspection (Front Pressure Sensor)
WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK DATA MONITOR
On "DATA MONITOR", select "PRESS SENSOR" and check the brake fluid pressure.
Condition PRESS SENSOR (DATA MONITOR) With ignition switch ON and brake pedal released. Approx. 0 bar With ignition switch ON and brake pedal depressed. Positive value Is the inspection result normal?
YES: Inspection End
NO: Go to diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE (FRONT PRESSURE SENSOR) ".