Diagnosis Procedure

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.

Regarding Wiring Diagram information, refer to "WIRING DIAGRAM ".

CHECK PARKING BRAKE SWITCH CIRCUIT
1. Disconnect combination meter connector and parking brake switch connector.
2. Check continuity between combination meter harness connector M24 (A) terminal 23 and parking brake switch harness connector M11 (B) terminal 1.
  23 - 1: Continuity should exist.
3. Check continuity between combination meter harness connector M24 (A) terminal 23 and ground.
  23 - Ground: Continuity should not exist.
  
  Fig 1: Checking Continuity Between Combination Meter Connector M24 Terminal 23 And Parking Brake Switch Connector M11 Terminal 1
  Courtesy of NISSAN NORTH AMERICA, INC.
  
  Is the inspection result normal?
  
  YES: Inspection End.
  
  NO: Repair harness or connector.