Detailed Flow
WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
- CONFIRM SYMPTOM
Confirm symptom or customer complaint.
: GO TO 2
- CHECK SELF-DIAGNOSIS OPERATION OF COMBINATION METER
Perform self-diagnosis of combination meter. Refer to "DIAGNOSIS DESCRIPTION ".
Does self-diagnosis mode operate?
YES: GO TO 3
NO: Check power supply and ground circuit of combination meter. Refer to "COMBINATION METER: DIAGNOSIS PROCEDURE ". Then, GO TO 4
- CHECK COMBINATION METER (CONSULT)
Select "METER/M&A" on CONSULT and perform "SELF-DIAGNOSIS" of combination meter. Refer to "CONSULT FUNCTION (METER/M&A) ".
Self-diagnostic results content
No malfunction detected: Repair or replace the cause of symptom. Then, GO TO 4
Malfunction detected: Refer to "DTC INDEX ". Then, GO TO 4
- CONFIRM OPERATION
Does the combination meter operate normally?
YES or NO
YES: Inspection End.
NO: GO TO 1