EVAP Canister Vent Control Valve: Removal

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.

Remove LH rear tire and wheel. Refer to "ROTATION ".
Disconnect EVAP canister vent control valve hose and electrical connector.
Release the lock and turn EVAP canister vent control valve counterclockwise.
Remove the EVAP canister vent control valve and O-ring.
CAUTION: Do not reuse O-ring.

Fig 1: Turning EVAP Canister Vent Control Valve Counterclockwise
Courtesy of NISSAN NORTH AMERICA, INC.