LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 895 (Power Control System (IPDM-E/R)) >> Unit Removal And Installation >> IPDM E/R (Intelligent Power Distribution Module Engine Room) >> Removal and Installation of IPDM E/R >> Removal

Removal and Installation of IPDM E/R: Removal

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative battery cable.
  2. Remove IPDM E/R upper cover.
    Fig 1: Identifying IPDM E/R Upper Cover And Battery
    G04904362Courtesy of NISSAN NORTH AMERICA, INC.
  3. Release 2 clips and pull IPDM E/R up from case.
  4. Disconnect IPDM E/R connectors and remove the IPDM E/R.
    Fig 2: Releasing IPDM E/R Clips
    G04937975Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals