Diagnosis Procedure
- PERFORM INITIALIZATION
Perform initialization with CONSULT. Re-register all mechanical keys.
For initialization and registration of mechanical key. Refer to CONSULT Immobilizer mode and follow the onscreen instructions.
Can the system be initialized and can the engine be started with re-registered mechanical key?
YES: ID was unregistered.
NO: GO TO 2
- PEPLACE BCM
- Replace BCM. Refer to "REMOVAL AND INSTALLATION ".
- Perform initialization with CONSULT. Re-register all mechanical keys.
For initialization and registration of mechanical key. Refer to CONSULT Immobilizer mode and follow the on-screen instructions.
Can the system be initialized and can the engine be started with re-registered mechanical key?
YES: BCM is malfunctioning.
NO: GO TO 3
- PEPLACE ECM
- Replace ECM. Refer to REMOVAL AND INSTALLATION .
- Perform initialization with CONSULT. Re-register all mechanical keys.
For initialization and registration of mechanical key. Refer to CONSULT Immobilizer mode and follow the on-screen instructions.
Can the system be initialized and can the engine be started with re-registered mechanical key?
YES: ECM is malfunctioning.
NO: GO TO 4
- CHECK INTERMITENT INCIDENT
Refer to "INTERMITTENT INCIDENT ".
:Inspection End.