LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 892 (LAN System (Can)) >> System Description >> Trouble Diagnosis >> DTC Index

DTC Index

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
DTC Self-diagnosis item (CONSULT indication) DTC detection condition Inspection/Action
U0101 LOST COMM (TCM) When ECM is not transmitting or receiving CAN communication signal of OBD (emission-related diagnosis) from TCM for 2 seconds or more. Start the inspection. Refer to the applicable service information of the indicated control unit.
U0140 LOST COMM (BCM) When ECM is not transmitting or receiving CAN communication signal of OBD (emission-related diagnosis) from BCM for 2 seconds or more.
U0164 LOST COMM (HVAC) When ECM is not transmitting or receiving CAN communication signal of OBD (emission-related diagnosis) from A/C auto amp. or unified meter and A/C amp. for 2 seconds or more.
U1000 CAN COMM CIRCUIT ECM When ECM is not transmitting or receiving CAN communication signal of OBD (emission-related diagnosis) for 2 seconds or more.
Except for ECM When a control unit (except for ECM) is not transmitting or receiving CAN communication signal for 2 seconds or more.
U1001 CAN COMM CIRCUIT When ECM is not transmitting or receiving CAN communication signal other than OBD (emission-related diagnosis) for 2 seconds or more.
U1002 SYSTEM COMM When a control unit is not transmitting or receiving CAN communication signal for 2 seconds or less.
U1010 CONTROL UNIT(CAN) When an error is detected during the initial diagnosis for CAN controller of each control unit. Replace the control unit indicating "U1010" or "P0607".
P0607 ECM