LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 891 (Engine Control System (Diagnostic Codes & Symptom Tests)) >> Symptom Diagnosis >> Normal Operating Condition >> Fuel Cut Control (at No Load and High Engine Speed) >> Input/Output Signal Chart

Input/Output Signal Chart

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
Sensor Input signal to ECM ECM function Actuator
TCM Neutral position Fuel cut control Fuel injector
Accelerator pedal position sensor Accelerator pedal position
Engine coolant temperature sensor Engine coolant temperature
Crankshaft position sensor (POS)
Camshaft position sensor (PHASE)
Engine speed
Wheel sensor Vehicle speed(1)
(1) This signal is sent to the ECM through CAN communication line.