With GST

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition switch ON.

Check voltage between ECM terminal 102 (PNP signal) and ground under the following conditions.

Condition (Gear position)	Voltage (Known good data)
P or N position	Approx. 0
Except the above position	BATTERY VOLTAGE (11 - 14 V)

If NG, go to "DIAGNOSIS PROCEDURE ".

Fig 1: Checking Voltage Between ECM Terminal 102 And Ground
Courtesy of NISSAN NORTH AMERICA, INC.