DTC Confirmation Procedure

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.

If DTC Confirmation Procedure has been previously conducted, always perform the following before conducting the next step.
1. Turn ignition switch OFF and wait at least 10 seconds.
2. Turn ignition switch ON.
3. Turn ignition switch OFF and wait at least 10 seconds.
Turn ignition switch ON wait at least 10 seconds.
Turn ignition switch OFF and wait at least 5 minutes.
Turn ignition switch ON, wait at least 10 seconds.
Repeat steps 2 and 3 for five times.
Check 1st trip DTC.
If 1st trip DTC is detected, go to "DIAGNOSIS PROCEDURE ".