Component Function Check
WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The Signal Tech II Tool (J-50190) can be used to perform the following functions. Refer to the Signal Tech II User Guide for additional information.
- Check Intelligent Key relative signal strength
- Confirm vehicle Intelligent Key antenna signal strength
- CHECK INSIDE KEY ANTENNA INPUT SIGNAL
With CONSULT
- Check "ANTENNA" in "Active Test" mode with CONSULT.
- Touch "ROOM ANT2".
- When Intelligent Key is in overhead console area antenna detection area, hazard lamps flash.
Test Item Condition Possible cause ROOM ANT2 An excessive high or low voltage from inside antenna is sent to the Intelligent Key Unit - Overhead console area antenna
- Between Intelligent Key unit and overhead console area antenna
Is the inspection result normal?
YES: Overhead console area antenna is OK.
NO: Refer to "DIAGNOSIS PROCEDURE ".