LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 890 (Door & Lock (With Intelligent Key System)) >> DTC/Circuit Diagnosis >> Hazard Function >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK HAZARD SWITCH CIRCUIT 

    Operate the hazard lights by turning ON the hazard warning switch.

    Do the lights operate normally? 

    YES: Replace the BCM. Refer to BCS for replacement and configuration procedure  .

    NO: Repair or replace hazard warning switch circuit. Refer to "REMOVAL AND INSTALLATION ".

scientia non olet · About LEMON Manuals