High and Low Reverse Clutch: Disassembly

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.

Remove bearing race from high and low reverse clutch drum.

Fig 1: Removing Bearing Race From High And Low Reverse Clutch Drum
Courtesy of NISSAN NORTH AMERICA, INC.
Remove snap ring from high and low reverse clutch drum using suitable tool.
Remove drive plates, driven plates and retaining plate from high and low reverse clutch drum.

Fig 2: Removing Snap Ring From High And Low Reverse Clutch Drum Using Suitable Tool
Courtesy of NISSAN NORTH AMERICA, INC.