High and Low Reverse Clutch: Assembly

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.

Install drive plates, driven plates and retaining plate in high and low reverse clutch drum.
CAUTION: Take care with the order of plates.

Fig 1: Identifying Drive Plates, Driven Plates And Retaining Plate In High And Low Reverse Clutch Drum
Courtesy of NISSAN NORTH AMERICA, INC.
Install snap ring in high and low reverse clutch drum using suitable tool.

Fig 2: Installing Snap Ring In High And Low Reverse Clutch Drum Using Suitable Tool
Courtesy of NISSAN NORTH AMERICA, INC.
Install bearing race to high and low reverse clutch drum.
CAUTION: Apply petroleum jelly to bearing race.

Fig 3: Installing Bearing Race To High And Low Reverse Clutch Drum
Courtesy of NISSAN NORTH AMERICA, INC.