LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 888 (Automatic Transmission) >> Unit Disassembly And Assembly >> Repair For Component Parts >> Front Sun Gear, 3rd One-Way Clutch >> Assembly

Front Sun Gear, 3rd One-Way Clutch: Assembly

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install 3rd one-way clutch in front sun gear.
    CAUTION: Apply ATF to 3rd one-way clutch.
    Fig 1: Installing 3rd One-Way Clutch In Front Sun Gear
    G04876103Courtesy of NISSAN NORTH AMERICA, INC.
  2. Install snap ring in front sun gear using suitable tool.
    Fig 2: Installing Snap Ring In Front Sun Gear Using Suitable Tool
    G04876102Courtesy of NISSAN NORTH AMERICA, INC.
  3. Check operation of 3rd one-way clutch.
    1. Hold oil pump assembly and turn front sun gear.
    2. Check 3rd one-way clutch for correct locking and unlocking directions.
      CAUTION: If not as shown, check installation direction of 3rd one-way clutch.
      Fig 3: Checking 3rd One-Way Clutch For Correct Locking And Unlocking Directions
      G04876106Courtesy of NISSAN NORTH AMERICA, INC.