LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 888 (Automatic Transmission) >> Removal And Installation >> Shift Control System >> A/T Shift Selector Removal and Installation >> Removal

A/T Shift Selector Removal and Installation: Removal

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove A/T finisher. Refer to "REMOVAL AND INSTALLATION ".
  2. Disconnect control cable.
  3. Disconnect A/T shift selector harness connector.
  4. Remove A/T shift selector assembly.
scientia non olet · About LEMON Manuals