Cruise Test - Part 2
- CHECK STARTING FROM D1
- Move selector lever the "D" position.
- Accelerate at half throttle.
With CONSULT
Read the gear position.
Does it start from D1?
YES: GO TO 2.
NO: Record the malfunction, GO TO 2.
- CHECK SHIFT-UP D1 → D2
Press the accelerator pedal down all the way and inspect whether or not the transmission shifts up (D1 → D2) at the correct speed.
Refer to "VEHICLE SPEED AT WHICH GEAR SHIFTING OCCURS ".
With CONSULT
Read the gear position, throttle position and vehicle speed.
Does the A/T shift-up D1 → D2 at the correct speed?
YES: GO TO 3.
NO: Record the malfunction, GO TO 3.
- CHECK SHIFT-UP D2 → D3
Press the accelerator pedal down all the way and inspect whether or not the transmission shifts up (D2 → D3) at the correct speed.
- Refer to
"VEHICLE SPEED AT WHICH GEAR SHIFTING OCCURS ".
With CONSULT
Read the gear position, throttle position and vehicle speed.
Does the A/T shift-up D2 → D3 at the correct speed?
YES: GO TO 4.
NO: Record the malfunction, GO TO 4.
- Refer to
"VEHICLE SPEED AT WHICH GEAR SHIFTING OCCURS ".
- CHECK SHIFT-UP D3 → D4 AND ENGINE BRAKE
When the transmission changes speed D3 → D4, return the accelerator pedal.
Does the A/T shift-up D3 → D4 and apply the engine brake?
YES:
- Stop the vehicle.
- Go to
"CRUISE TEST - PART 3 ".
NO: Record the malfunction and go to "CRUISE TEST - PART 3 ".