LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 888 (Automatic Transmission) >> DTC/Circuit Diagnosis >> DTC P0740: Torque Converter >> DTC Confirmation Procedure >> With Consult

With Consult

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch "ON". (Do not start engine.)
  2. Select "DATA MONITOR" mode for "ENGINE" with CONSULT.
  3. Start engine and maintain the following conditions for at least 5 consecutive seconds.

    VHCL/S SE-A/T: 80 km/h (50 MPH) or more 

    ACCELE POSI: 0.5/8 - 1.0/8 

    SLCT LVR POSI: "D" position 

    Driving location: Driving the vehicle uphill (increased engine load) will help maintain the driving conditions required for this test. 

  4. If DTC is detected go to "DIAGNOSIS PROCEDURE ".