Diagnosis Procedure
WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
Regarding Wiring Diagram information, refer to "WIRING DIAGRAM ".
- CHECK VOLTAGE REGULATOR CIRCUIT CONNECTION
Check to see if connector E205 terminal 3 is clean and tight.
Is the inspection result normal?
YES: GO TO 2.
NO: Repair terminal "3" connection. Confirm repair by performing complete Charging system test using EXP-800 NI or GR8-1200 NI (if available). Refer to the applicable Instruction Manual for proper testing procedures.
- CHECK VOLTAGE REGULATOR CIRCUIT
Check voltage between generator harness connector E205 terminal 3 and ground.
3 - ground Battery voltage
Does battery voltage exist?
YES: Refer to "WORK FLOW (WITH EXP-800 NI OR GR8-1200 NI) " or "WORK FLOW (WITHOUT EXP-800 NI OR GR8-1200 NI) ".
NO: Check harness for open between generator and fuse.