Removal and Installation: Removal
WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
- Set the front wheels in the straight-ahead position.
- Remove the driver air bag module. Refer to "REMOVAL AND INSTALLATION ".
- Disconnect steering wheel switches.
- Remove the steering wheel center nut.
- Remove the steering wheel using Tool (A).
Tool number: ST27180001 (J-25726-A)
CAUTION: Place a piece of tape across the spiral cable so it will not be rotated out of position. - Inspect the steering wheel near the puller holes for damage. If damaged, replace the steering wheel.
- Remove steering wheel rear cover and steering wheel switches, if required.