Checking Steering Wheel Turning Force
WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
- Park vehicle on a level, dry surface and set parking brake.
- Start engine.
- Bring power steering fluid up to an operating temperature of approximately 60° - 80°C (140° - 176°F).
- Make sure the tires are inflated to specified pressure. Refer to "TIRE ".
- Check steering wheel turning force using Tool when steering wheel has been turned 360° from the neutral position.
Tool number: (-) J-44372
Steering wheel turning force: Refer to "STEERING WHEEL ".
- If steering wheel turning force is out of specification, inspect steering column. Refer to "DISASSEMBLY AND ASSEMBLY ".
- If steering column meets specification, repair steering gear. Refer to "DISASSEMBLY AND ASSEMBLY ".