Regulator Valve Clearance
WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
Check regulator valve to oil pump cover clearance using the following formula.
- (Clearance) = D1 (Valve hole diameter) - D2 (Outer Diameter of valve)
Regulator valve to oil pump cover: Refer to REGULATOR VALVE .
Courtesy of NISSAN NORTH AMERICA, INC.
CAUTION:- Coat regulator valve with engine oil.
- Check that it falls smoothly into the regulator valve hole by its own weight.