Tire Rotation

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.

Follow the maintenance schedule for tire rotation service intervals. Refer to "FOR USA AND CANADA: INTRODUCTION OF PERIODIC MAINTENANCE " (FOR USA AND CANADA), "FOR MEXICO: INTRODUCTION OF PERIODIC MAINTENANCE " (FOR MEXICO).
Rotate the wheel and tires front to back in the pattern as shown below. When installing the wheel and tires, tighten the wheel nuts diagonally to the specified torque.
Wheel nut tightening torque: 133 N.m (14 kg-m, 98 ft-lb)

Fig 1: Tire Rotation Pattern
Courtesy of NISSAN NORTH AMERICA, INC.

CAUTION:

Do not include the spare wheel and tire when rotating the wheel and tires.
When installing the wheel nuts, tighten them diagonally by dividing the work two to three times in order to prevent the wheels from developing any distortion.
Be careful not to tighten the wheel nuts to a torque exceeding specification to prevent strain on the disc rotor.
Use genuine NISSAN wheel nuts for aluminum wheels.