LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 880 (Front Final Drive (M205)) >> Removal And Installation >> Carrier Cover >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain differential gear fluid. Refer to "CHANGING DIFFERENTIAL GEAR OIL ".
  2. Remove the front final drive assembly. Refer to "REMOVAL AND INSTALLATION ".
  3. Remove the carrier cover bolts and separate the carrier cover from the gear carrier using tool.

    Tool number: KV10111100 (J-37228) 

    CAUTION:
    • Do not damage the mating surface.
    • Do not insert flat-bladed screwdriver, this will damage the mating surface.
    Fig 1: Separating Carrier Cover From Gear Carrier Using Tool
    G04901835Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals