Changing Differential Gear Oil: Draining
WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
- Stop the engine.
- Remove the drain plug from the front final drive assembly to drain the differential gear oil.
- Install the drain plug with sealant applied on the threads to the front final drive assembly. Tighten to the specified torque. Refer to
"DISASSEMBLY AND ASSEMBLY ".
- Use High Performance Thread Sealant or equivalent. Refer to "RECOMMENDED CHEMICAL PRODUCTS AND SEALANTS ".