LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 878 (Maintenance) >> Periodic Maintenance >> Chassis And Body Maintenance >> Transfer Fluid >> TRANSFER FLUID: Replacement >> Draining

TRANSFER FLUID: Replacement: Draining

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Stop engine.
  2. Remove the drain plug and gasket and drain the fluid.
  3. Install the drain plug with a new gasket to the transfer. Tighten to the specified torque. Refer to "UNIT DISASSEMBLY AND ASSEMBLY ".
    CAUTION: Do not reuse gasket.
    Fig 1: Identifying Transfer Case Drain Plug
    G04901436Courtesy of NISSAN NORTH AMERICA, INC.