LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 878 (Maintenance) >> Periodic Maintenance >> Chassis And Body Maintenance >> Transfer Fluid >> TRANSFER FLUID: Inspection >> Fluid Leakage And Fluid Level

Fluid Leakage And Fluid Level

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Make sure that fluid is not leaking from the transfer assembly or around it.
  2. Check fluid level from the filler plug hole as shown below.
    CAUTION: Do not start engine while checking fluid level.
  3. Install the filler plug with a new gasket to the transfer. Tighten to the specified torque. Refer to "UNIT DISASSEMBLY AND ASSEMBLY ".
    CAUTION: Do not reuse gasket.
    Fig 1: Checking Transfer Fluid Level
    G04901437Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals