LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 877 (Engine Cooling System) >> Removal And Installation >> Thermostat And Water Piping >> Removal and Installation >> Removal >> Removal of Water Cut Valve

Removal of Water Cut Valve

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Partially drain the engine coolant from the radiator. Refer to "CHANGING ENGINE COOLANT ".
    CAUTION: Perform when the engine is cold.
  2. Disconnect the water cut valve connector.
  3. Disconnect the water hoses from the water cut valve.
  4. Remove the water cut valve.
scientia non olet · About LEMON Manuals