Connecting Rod Side Clearance

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.

Measure side clearance between the connecting rod and crankshaft arm using suitable tool.
Standard: 0.20 - 0.40 mm (0.0079 - 0.0157 in)

Limit: 0.40 mm (0.0157 in)

Fig 1: Measuring Side Clearance Between Connecting Rod And Crankshaft Arm Using Tool
Courtesy of NISSAN NORTH AMERICA, INC.
If measured value exceeds the repair limit, replace the connecting rod bearings, and measure again. If it still exceeds the repair limit, replace the crankshaft also.