Removal and Installation: Removal
WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the ignition coils. Refer to "REMOVAL AND INSTALLATION ".
- Remove PCV hoses.
- Move the harness on the upper rocker cover and its peripheral aside.
- Loosen the bolts in reverse order shown below using power tool for rocker cover (A) or (B).
Courtesy of NISSAN NORTH AMERICA, INC.
CAUTION: Do not hold the rocker cover (RH) (B) by the oil filler neck.